<div dir="ltr"><div dir="ltr">On Sat, Sep 11, 2021 at 3:32 PM spike jones via extropy-chat <<a href="mailto:extropy-chat@lists.extropy.org">extropy-chat@lists.extropy.org</a>> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div lang="EN-US" style="overflow-wrap: break-word;"><div class="gmail-m_-8701005368713950544WordSection1"><p class="MsoNormal">Idea: there is sufficient room in that short driveway to build a turntable.  We know at car shows there are such things, but that isn’t really what I have in mind, for that would be expensive and would be too easy anyway.  A caveman could hire people to install that.  But I thought of a way to build a homebrew turntable nearly flush with the ground using stuff ordinary proles could find easily: a truck wheel hub assembly.  The conic bearings on those rigs would easily bear the load both in thrust and torque that an ordinary passenger car would deliver to it.  The whole assembly is already weather sealed, and already has a grease zerk for easy periodic maintenance.  Cool!<br><u></u></p><p class="MsoNormal"><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">That whole notion would require sinking a hole about 20 cm down and about 50 cm across, the hub assembly could go down there, welded to a base plate, then the turntable could be made of channel iron (C-section) beams in an H configuration.  I know how to do all the necessary sizing calculations.  A coupla fellers with a welder could build something like that for a coupla thousand bucks methinks.  That’s play money for anyone who lives in Palo Alto.<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">I digress however, for that has little or nothing to do with patents.  But Max’s patent fight comment brings up another kinda related idea: we could have fist fights where the pugilists are dressed up as cavemen.  Sounds like fun, however I digress even further into the abysss of absurdity.  <u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">I have half a mind to sketch up the idea and mail it, addressed to: Feller who lives at 1079 Embarcadero, Palo Alto CA.<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Adrian, isn’t Palo Alto in your neighborhood?  You and I could start a side biz making low-cost turntables for proles living on Embarcadero Road.  You could use the earnings from that to support your rocket science habit.  I have a welder.</p></div></div></blockquote><div><br></div><div>It would have to be powered (turning it by hand with a car parked on it would take way too much effort) .  You would need clearance around the turntable in case the car is parked off-center enough to hang over the edge...and it would need to lock if a car is only halfway on it (and it would need to tell the difference between 2 wheels of a car and 2 wheels of a motorcycle), if you didn't want a large ongoing insurance premium.  It's construction, with all that licensing and paperwork.<br></div><div><br></div><div>Most importantly, while there are some houses that could benefit from this, their quantity is limited - likely way insufficient to warrant product development.</div></div></div>