<div dir="ltr"><div class="gmail_default" style="font-family:arial,helvetica,sans-serif"><font size="4" face="tahoma, sans-serif"><b>There are two different paths that I think could bring on the Singularity, AI and Nanotechnology, it looks like AI will hit first but nevertheless I want to talk about Nanotechnology, particularly the top down variety used by the semiconductor chip industry rather than the bottom up path proposed by Eric Drexler.  Chipmakers use light to edge patterns onto silicon, the smaller the wavelength of light the smaller the pattern they can etch. Until recently  the smallest wavelength of light used was 193 nanometers in the Deep Ultraviolet range made with a Fluorine Argon laser (visible light ranges from red at 750 nm to violet at 380 nm). Then the Dutch company ASML started to sell Extreme Ultraviolet Lithography machines to chip makers that use 13.5 nm light from vaporized Tin. ASML has a complete monopoly on these super advanced and super complex machines because they were the only company willing to take the risk of spending vast amounts of money for well over a decade to develop them, it's so expensive nobody else is even trying to make something comparable; and the way thei<span class="gmail_default">r</span> machines work is amazing.</b></font><div><br></div><div style="font-family:Arial,Helvetica,sans-serif"><font size="4" face="tahoma, sans-serif"><b>The first thing you need to do is make a bright point source of Extreme Ultraviolet light, nobody has been able to make a laser with a wavelength that short and synchrotron radiation is not a point source, but when Tin is vaporized it has a bright spectral line at 13.5 nm, so they decided to use that.  50 thousand times a second a tiny droplet of molten tin is fired into the machine at 80 meters a second. Each droplet is then hit twice by two different lasers, the first laser pulse is low power and come<span class="gmail_default">s</span> from a YAG laser of the type used in eye surgery, it reshapes the tin droplet from a sphere to a concave sheet, to do this the laser must hit it at exactly the right instant or the droplet will be at the wrong orientation. The second laser pulse is far more powerful and is in the 10 mm infrared region and comes from a 25 kW carbon dioxide laser which is 5 times as powerful as lasers that are commonly used to cut steel,  this vaporizes the Tin droplet and produces a flash of 250 watts of 13.5 nanometer light. Without that first laser pulse that reshapes the Tin droplet the EUV output would be less than 10 watts. </b></font></div><div style="font-family:Arial,Helvetica,sans-serif"><font size="4" face="tahoma, sans-serif"><b><br></b></font></div><div style="font-family:Arial,Helvetica,sans-serif"><font size="4" face="tahoma, sans-serif"><b>One significant problem they had to overcome was that the vaporized Tin tended to land on the delicate optical surfaces and degrade their performance, they eventually solved that problem by introducing a very small amount of hydrogen into the laser reaction chamber instead of having a hard vacuum.</b></font></div><div><br></div><div style="font-family:Arial,Helvetica,sans-serif"><font size="4" face="tahoma, sans-serif"><b>You can't use any lenses if you're dealing with EUV light (they're really soft x-rays) because <span class="gmail_default">g</span>lass, sapphire<span class="gmail_default">,</span> diamond or any known substance would just absorb <span class="gmail_default">the light</span>, so your only alternative is to use mirrors instead and even those are <span class="gmail_default">not </span>easy to make. Each machine needs 6 mirrors a meter wide made with an accuracy of less than a 10^-12 meters ( a thousandth of a billionth of a meter),  they<span class="gmail_default">'re</span> the most perfect mirrors human beings have ever made, and they must be coated with 50 layers of molybdenum and silicon to reflect light with such a small wavelength, even then each of the six mirrors only reflect about 70% <span class="gmail_default">if</span> the light that falls on <span class="gmail_default">them,</span> and that severely reduces the amount of light you can actually use to etch things, that's why the point source has to be so bright. </b></font></div><div><font size="4"><br></font></div><font size="4" face="tahoma, sans-serif"><b>Until recently the only EUV machine in the world was ASML's NXD360D. It costs $160 million, is the size of a school bus weighs about 200 tons and has a Numerical Aperture of 0.33 (a dimension list number that determines how much light a lens or mirror can bring to a focus) it can produce a 26 nm pitch (the minimum center-to-center distance between lines that connect circuit elements), it can make about 160 wafers an hour, after manufacture each wafer is worth about $17,000. A typical chip fabrication plant will need several dozen of these machines.<br></b></font><div style="font-family:Arial,Helvetica,sans-serif"><br><div><font size="4" face="tahoma, sans-serif"><b>The resolution a lithography machine can produce is proportional to  (light wavelength)/ 2* ( Numerical Aperture) so a mirror (or lens) with a larger numerical aperture will be able to print finer details onto silicon than a mirror with a smaller NA<span class="gmail_default"> because it</span><span class="gmail_default"> can focus more of the EUV light.  </span><span class="gmail_default">ASML's next generation machine is the </span>EXE<span class="gmail_default">5000, it uses the same wavelength of light but increases the NA from 0.33 to 0.55 and can write a line on silicon with 16 nanometer pitch not 26 with the older machine</span> and process 220 wafers an hour <span class="gmail_default">not 160 like the </span><span class="gmail_default">older </span>NXD360D<span class="gmail_default">, it even uses 45% less electricity. The drawbacks to the new machine are it's even larger, about twice the size of a railroad locomotive, and it costs 380 million dollars, and yet everybody is desperate to get one. Apparently Intel wants one more than anybody else because they had dibs on the very first one that rolled out of ASML's plant.  </span></b></font></div><div style="font-family:arial,helvetica,sans-serif"><span style="font-size:large"><span class="gmail_default"><br></span></span></div><div><font size="4" face="tahoma, sans-serif"><b>A<span class="gmail_default">SLM is not allowed to sell its EUV Machines to Russia or China, but that hasn't hurt the company because even without those markets they're selling their machines as fast as they can make them, and ASML now has a net worth  two and a half times that of one of its much more famous customers, Intel.</span></b></font></div><div><font size="4" face="tahoma, sans-serif"><b><span class="gmail_default"><br></span></b></font></div><div><font size="4" face="tahoma, sans-serif"><b><span class="gmail_default">John K Clark</span></b></font></div></div></div></div>